|Place of Origin:||China|
|Minimum Order Quantity:||Negotiable|
|Packaging Details:||container packaging|
|Supply Ability:||Two machines per month|
|Sheet Thickness:||1.0~1.5(mm)||Corrugated Sheet Width:||300~1300（mm）|
|Molding Efficiency:||3 Pieces / Minute||Total Weight:||15T|
|Ripple Pitch Error:||± 0.2（mm）||Reinforcement Slot Number:||≤ 2|
corrugated sheet making machine,
corrugated sheet roll forming machine
Stable Transformer Metal Corrugated Wall Making Machine Sheet Thickness 1.0 - 1.5 Mm Low Noise
Transformer Metal Corrugated Wall Making Machine Introduction
As a common power system power transmission and transformation equipment, the transformer is mainly composed of a core, a winding and a fuel tank. During the working process of the transformer, since the iron core and the winding generate a large amount of heat, thus heat dissipation is required, and the main function of the oil tank is to dissipate heat. The transformer fuel tank has a tubular fuel tank, a flat oil tank and a corrugated oil tank. In contrast, the corrugated oil tank has better heat dissipation effect and therefore has a good application prospect.
(1) The machine design structure is reasonable, the appearance is beautiful, and its operation, adjustment and maintenance are convenient. The fuselage adopts frame box structure, computer optimized design, steel plate welding, should have anti-angular deformation and partial load performance, requiring the body to have corresponding strength, rigidity and precision.
(2) Selection of hydraulic components and electrical components: the advantages and disadvantages of the original parts and accessories must consider the manufacturing cost of the whole machine, but also consider the quality of the unit and the credibility of manufacturing. Practice has proved that often a small Seals or electrical components, causing leakage or malfunction, resulting in downtime, so in the component distribution, the brand manufacturer's products should be adopted, and the brand grade belongs to the superior brand products.
(3) All rails, guide pillars and guide bushings are concentrated and thin oil lubricated, with low wear, high guiding precision, stable combination, sensitive action, low noise and long use.
The molding machine, also known as the unpacking machine, refers to the automatic unpacking, forming, and bending of the lower bottom flap. At present, the lower part of the tape is pasted, and the box board which is stacked into cardboard is opened, and the bottom of the box is folded according to a certain procedure, and sealed with a tape and then delivered to the special equipment of the boxing machine. The automatic carton forming machine and automatic unpacking machine are the assembly line for automatic unpacking of large-volume carton, automatic folding of the lower cover and automatic sealing of the bottom tape. The machines are all controlled by PLC+ display, which is very convenient for operation and is essential for automated scale production device of.
The corrugated sheet forming machine is a kind of molding machine. Its characteristics are: magnetic introduction, flat and free; relay control, single operation; compared with similar products, it has remarkable characteristics of low energy and high efficiency. Hydraulic transmission, stable and reliable; easy to cut, safe and fast; pitch positioning, one-shot molding.
Durable practical equipment for producing transformers
Forming machine consists of decoiler, coil car, fin forming machine, hydraulic system, electrical control system.
Function : including materials guidance, feeding, position guidance, materials pushing, front pack, rear pack, edge folding, shearing and of parts collection.
Machine is nice in outlooks, rational in structure and easy in operation
Machine is renowned for hydraulic driving, automatic control, low noise, stable running and human-computer dialogue display. The computer unit in the machine can perform the processes of shearing, forming and edge folding at one stroke according to data input.
Machine has been proven for lasting performance, reliable quality, high efficiency and easy operation.
Transformer Metal Corrugated Wall Making Machine Technical Parameters
|Corrugated Sheet Length||300~2000(mm)|
|Corrugated Sheet Width||300~1300(mm)|
|Corrugated Sheet Height||40~400±0.2(mm)|
|Corrugated Sheet Pitch||42~80±0.5(mm)|
|Reinforcement Slot Number||≤ 2|
|Reinforcing Rib Length||≤ Corrugated Sheet Width-16 mm|
|Non-perpendicular deviation of corrugated sheet from its base surface||≤ 1% of wave height|
|Ripple Pitch Error||± 0.2(mm)|
|Molding Efficiency||3 pieces / minute|
Good quality: We have a professional designer and experienced engineer team
Contact Person: Jacky Liao